How to Approach A level Biology Graph and Table Questions: Tips and Exam Question Pack

Get top marks when analysing figures, tables and images by avoiding common mistakes that students make

This article contains key vocabulary, a strategy for how to approach questions for success, a multichoice quiz with answers, and a big pack of past paper exam questions

Don’t panic, it’s only a graph

The single best exam tip for graphs and tables exam questions is to start by looking at the graph or chart itself. DO NOT LOOK AT THE QUESTIONS FIRST! This single thing will help you avoid the most common mistakes that students make.

But you also need to know what you’re doing. Which means you’ll need to be confident with these terms:


Background Knowledge / Vocabulary:

  • Independent Variable: The variable that you purposefully set to different values during the experiment

  • Dependent Variable: The variable that you measure during the experiment, which is unknown until it is measured

  • Replicate: Experimental data is often replicated - the same data point is recorded multiple times for the same conditions

  • Accuracy / Precision: Accuracy is how close the replicated values are to the correct value, and precision is how close they are to each other. If there is an unknown problem with the experiment, results can be very precise but have very low accuracy.

  • Range / Standard Deviation: The amount of variation in the data. A large range or standard deviation means that the replicated data had a broad range of results. A small range or standard deviation means they were much more similar in value. Range / Standard deviation is therefore a measure of precision.

  • Trend: What is the general relationship between the dependent and independent variables? When the experimenter increased the independent variable, what happened to the dependent variable? What shape is the graph?

How to Approach the Question:


1. Look at the graph or chart first!
Too many students look at the question first, get confused or panicky about what it is asking, and form preconceptions about what data they need. This then means they are then unable to look at the data clearly, and miss the information they actually need. Looking at the graph or chart first both makes the data easier to understand, and makes it easier to work out what the question is asking.

Trust me, this is a major factor in student success. If you only take away one thing from this article, always look at the graph or chart first.

2. Don’t panic if it’s about something totally unfamiliar
Students can get very thrown if the question is about an organism or molecule that they have never heard of before (the exam boards do this a lot). This sudden panic makes it hard to think clearly.

Remember - if you have covered all the course material, even if the question is about something weird and new then all the information you need will be in the data. The things that look scary are just surface details. If the question was “Fred gave James two apples, how many apples does James have” you wouldn’t need to know who these people were to answer the question.

But don’t just dive in to the details of the data …

What’s going on here?

3. Understand the format
Don’t waste time looking at the actual dots or numbers until you understand how the data has been presented. Check every aspect methodically. It’s too easy to make assumptions based on previous graph/table formats you have seen - this one might be different!

  • Look at the headings / axis labels and units. What is the data showing?

  • Identify the independent variable and the dependent variable. If possible, it’s helpful to label them “IV” and “DV”.

  • What type of data is shown? Is it averages? Does it include a Range or Standard Deviation?

  • Graphs: Check the axis labels. Have they plotted rate or time, mass/volume or concentration? Often students assume enzyme graphs have rate on the y axis - but sometimes they don’t!

  • Tables: Check: is the Independent Variable in the first column? Is the data in each row consistent?

4. Look at the data
Now you understand its context, look at the actual dots or lines or numbers. Check:

  • Does the Range overwhelm differences in values: Do the range bars or standard deviation bars overlap? If they do, then there is significant overlap between the populations of replicated results that were used to calculated the average values.

  • Unspecified Ranges: If there are replicates but no range bars or standard deviation has been calculated, how broad does the range look when you compare the replicated data values to their mean?

  • Trends: What trends can you observe? Then think about what principle of biology is being shown by the the trends.

Now think about what it all actually means:

  • Values: How would you explain the highest value, the lowest value, the point at which the line crosses the x axis,

  • Range: How would you explain the largest range? How would you change the method to reduce the spread in the data?

5. Ok - NOW look at the actual questions
Try to see past the detail. How does this data/question relate to things you have studied?

Your working memory can easily get overloaded with details, making it hard to think. If the examiners have introduced a new organism, its name won’t be important. What might be important is the environment in which it lives, or its interactions with other organisms. You know what data you have, and what the questions are, so pick out what actually matters here. Is this a question about enyme reaction rates? Or about surface area to volume ratio?

This is why it’s useful to look at the data first - you will be able to look at it with a clear eye, making it easier to pick out how it’s relevant to the material you have studied.

6. Give the required information
Avoid the common mistakes that lose students marks:

  • If they say you should use the data, you must either quote it, or show how you have used in in a calculation

  • Refer to the axis/data labels wherever possible. Don’t say “the graph goes up”, do say “the saturation of haemoglobin increases”


A-Level Biology Past Paper Graphs and Charts Exam Questions:

Got all that? Ok! Here are some questions for you to practice.

And remember - don’t read the questions until after you have made sense of the graph or chart.

This article was written by Dr Jenny Shipway with guidance and editing from Tom. Tom has over 26 years experience specialising in A level Biology teaching and tuition, and has helped many students achieve top grades in the subject.

Photosynthesis Tips - Notes, videos, powerpoints and a pack of long questions

Powerpoints and notes, a pack of long data analysis exam questions and a test on photosynthesis

Tips for Photosynthesis

LDR - occurs on the thylakoid membranes. Limiting factor is light intensity

  • Phosphorylates ADP (through chemiosmosis) - creates the Hydrogen ion gradient by the flow of electrons along the ETC in the thylakoid membrane. The flow of electrons is driven by the capturing of light by a range of different pigments which channel the energy to a chl a molecule at the reaction centre of the photosystem - which then loses an electron.

  • Reduces NADP with an electron from splitting water (photolysis) at PSII.

Light Independent Reaction (reduction of carbon dioxide) - occurs in the stroma (the cytoplasm of the chloroplast).

  • Limited by speed and quantity of RUBISCO enzyme (kinetic energy - temperature) and substrate concentration (Carbon dioxide)

  • Needs the products of the LDR - ATP and NADPH

  • NADPH and ATP are used to regenerate RUBP

  • Each time the Calvin cycle turns, a single Carbon is reduced. 3 turns - one extra Triose Phosphate. 6 turns - 2 extra TP = 1 extra glucose.

  • TP is the source of all of the carbon in all plants (and hence in all heterotrophes) - Amino acids, DNA, RNA, phospholipids etc

Read more

How to Answer Hardy-Weinberg Questions - A-level Biology - with question pack

How to understand and answer Hardy-Weinberg Questions - A-level Biology. Remember to look out for questions where they give you a dominant phenotype frequency -for instance Huntingdons disease, where the frequency of the sufferers is 1 in 100000 - therefore q squared (recessive allele phenotype) is 99999 in 100000.

if you use - then like and share

Read more

Haemoglobin Oxygen Dissociation Curve / Bohr Effect Exam Questions - How to understand the Sigmoid Curve

Lots of Haemoglobin Oxygen Dissociation Curve/ Bohr Shift Questions and Markschemes, suitable for OCR A, AQA - and a brief guide to Understanding them.

The key to understanding dissociation curves is firstly to understand the concept of partial pressure and what would make it change. And to understand cooperative binding.

- if you use then life and share

Read more

How to approach and answer A-level Biology Questions that need you to Analyse Figures, Tables and Images - lots of example past paper questions

How to approach and answer A-level Biology Questions that need you to Analyse Figures, Tables and Images - lots of example past paper questions with the markschemes

DO NOT LOOK at the question and then look at the data to answer the question.

  • Look closely at the graph or table

  • look very carefully at the axes - have they plotted mean or rate or time, mass/volume or concentration ?

  • can you see range bars ?

  • In a table what range is in the replicates when you compare to the mean ?

  • what trends can you observe ? then think about what principle of biology is being shown by the the trends.

  • How would you explain the highest value, the lowest value, the point at which the line crosses the x axis, how would you explain the largest range, how would you change the experiment to reduce the spread in the data ?

Once  you have a coherent understanding of the trends  - only then look at the question.

Read more

Nitrogen Cycle - a quick guide to understanding the concept, and a pack of questions - for A-level Biology

How to understand the Nitrogen Cycle

Nitrogen Cycle : A few tips

Start with dead plants and animals or faeces.  

Remember that decomposers are just heterotrophes respiring dead stuff and producing ammonia from the deamination of amino acids (the keto acid that remains following deamination is respired).

Ammonia then gets oxidised to nitrite  and oxidised to nitrate by nitrifying bacteria  - Nitrosomonas and Nitrobacter , both  aerobic chemoautotrophes.

Nitrates are actively transported into the roots, by a carrier protein which uses ATP from the mitochondria, then via the xylem to the leaves. In the leaves the nitrate is reduced to ammonia  and then used to make (with carbon from photosynthesis)  amino acids and nucleic acids  and hence more plant !.

Growing a crop removes protein and nucleotides from a field (and sells it in Tesco !).  To maintain fertility you need to make an input of nitrogen - this can be organic (dead things and faeces), which feed the decomposers. Or inorganic - made by joining nitrogen and hydrogen in the Haber process to make ammonia (applied to fields as ammonium nitrate), lightening also make nitrogen oxides - but is harder to arrange.

Rhizobium, a symbiotic bacteria,  living in root nodules of legumes, benefits from  an anaerobic environment, the legume makes Leghaemoglobin, a protein with a high affinity for oxygen which therefore prevents oxygen from poisoning the nitrogen reducing enzyme of the bacteria.

Rhizobia use sucrose from the plant for respiration. Rhizobia make ammonia (and hence amino acids) from nitrogen gas, the plants use these amino acids for growth. When legumes die, the nitrogen in the  proteins of the dead plant is made available to other non-leguminous plants by decomposers.

Decomposers and nitrifying bacteria are aerobes so ploughing - which increases the availability of oxygen in the soil - will raise the concentration of nitrates and hence the ability of the plants to make more protein.,

Pseudomonas denitrificans is an anaerobe so thrives in waterlogged soil. Denitrification uses nitrate as an electron acceptor, the nitrate is reduced to Nitrogen gas, thus farmers drain fields to maintain fertility of the soil.

Read more